Welcome and getting started
​
Dear Customer,
Thank you for choosing Technique Partner. We appreciate the opportunity to be part of your training. Before your first session, please read this guide and the instructions for your specific product. Proper setup and regular inspection help you get the most from your equipment.
I welcome your questions, product feedback and training videos. If you need help with assembly, replacement parts or a product concern, please reach out. Thank you for supporting Technique Partner.
Sincerely,
Andrew Ciasulli
Founder, Technique Partner LLC
484-425-0776 | techniquepartner@gmail.com
​
Before your first use
-
Check the shipment against your order. Save your receipt and photograph any damage to the product or packaging. Contact us promptly if anything is missing or damaged; do not use damaged equipment.
-
Follow the setup instructions for the model and accessories you received. Confirm that the base, attachments and fasteners are fully secured before use. Do not guess at an assembly step or substitute parts.
-
For ShadowPartner, keep fingers clear while sliding the base into place. Arrange and secure the clothing and drawstring as shown in the instructions so the protective coverings stay in position.
Acceptance of terms assumption of risk and limited release
IMPORTANT — ACCEPTANCE OF TERMS, ASSUMPTION OF RISK AND LIMITED RELEASE
Read these terms and the product-specific safety instructions before using the equipment.
By retaining or using this equipment, you acknowledge and agree to these terms. If you do not agree, do not use the equipment. Contact Technique Partner within 14 days after delivery to arrange an unused return under the published return policy.
Wrestling, strength training and related physical activities involve inherent risks, including falls, loss of balance, twisting injuries, fractures, and impacts with equipment or other people. Serious injury can occur even when equipment functions as intended. You voluntarily assume the inherent risks associated with participating in these activities.
You agree to follow the product’s setup, inspection, supervision and permitted-use instructions, and to stop using damaged or unsafe equipment.
To the fullest extent permitted by applicable law, you release Technique Partner LLC and its officers and employees from claims for personal injury or property damage arising from your use of the equipment, including claims based on their ordinary negligence.
This release does not apply to gross negligence, reckless or intentional misconduct, or any product-liability claim or other right that applicable law does not permit to be released. Nothing in these terms eliminates mandatory consumer rights.
ShadowPartner safety and permitted use
WARNING — FALL, IMPACT AND MOVING EQUIPMENT HAZARDS
Wrestling involves falls, twisting movements and physical contact that can cause sprains, fractures, head or neck injuries, and other serious injuries. These risks remain when training with ShadowPartner.
ShadowPartner is not a fall-protection device. Its foam covers internal structural components but does not make an uncontrolled landing safe. Do not rely on the dummy to cushion your fall. Do not dive head-first into the equipment or deliberately land your head on it. Use controlled technique on an appropriate wrestling or martial arts training surface.
Keep other people clear. During throws and other maneuvers, the dummy, legs and base attachments can swing outward and strike someone nearby. Before beginning, clear the entire movement, swinging and landing area. Stop whenever another person enters that area.
Inspect before every use. Check the head, body, arms, legs, base attachments and protective coverings. Do not use the equipment if foam is torn, missing or displaced; internal hard components are exposed; the head is loose; or any structural component or spring is damaged. Clothing alone does not provide adequate protection over exposed internal components. Remove damaged equipment from service immediately.
Do not attempt to detach the head. Do not yank, twist or pull the head in an attempt to remove it, or lift or drag the entire device by its head. Displacing the head can expose the hard head post and create an impact hazard.
Do not force the joints or torso. Do not force an elbow backward, forcibly fold the torso in either direction, or deliberately land on the legs to bend them. For the XL, extreme backward folding can overtwist and fracture the hip springs. Stop using the equipment after tearing, breakage, permanent deformation or unexpected changes in movement.
Use the complete approved lower-leg assembly. Never train with bare lower-leg pipes. Fit the approved protective base, or the approved shoe attachment with its shoe properly installed, before use.
Children must receive appropriate instruction and direct adult supervision. Contact Technique Partner if you are uncertain whether the equipment is safe to use.
Hanging GripPartner safety and permitted use
WARNING — FALL AND EQUIPMENT FAILURE HAZARDS
The GripPartner Rope Climber and Pull Package involve bodyweight hanging or pulling. Loss of grip, fatigue, incorrect installation, or failure of the equipment or supporting structure can cause a fall and serious injury.
Minimize the fall distance. Install the equipment at the lowest height that permits the approved exercise. Use a landing mat suitable for the exercise and potential fall beneath the entire landing area. A mat reduces some impact hazards but does not eliminate the possibility of injury.
Use only a suitable, securely installed support and the mounting method specified for your product. Inspect the complete support and attachment system before each use. Do not assume that a bar or mounting point is suitable merely because the equipment can be attached to it.
Maintain an upright position and controlled movement. Do not hang upside down, swing, kip, perform tricks or jump onto the grips. Keep the landing area clear of people and objects. Stop before fatigue prevents you from maintaining a secure grip or controlled landing.
Hold only the molded polyurethane gripping surfaces. Do not place your hands or fingers on the metal hardware, fasteners or connection points above the grips.
Inspect the grips, ropes, cables or straps, fasteners and attachment points before every use. Do not use equipment with cracks, chips, sharp edges, looseness, deformation or structural damage. Assess Rope Climber rope wear using the rope-specific guidance below.
Do not drop the grips onto hard surfaces. An impact can crack or weaken them. After an impact, remove the affected equipment from service until its condition has been assessed. Do not repair a cracked grip with glue or tape.
Children require direct adult supervision. Do not exceed the published limits for your product and mounting configuration.
Rope Climber rope wear and mounting surfaces
The Rope Climber rope is a wear item. Some light surface fuzzing may develop during normal use and does not necessarily require replacement. Inspect the entire rope before every use, especially where it contacts the mounting surface.
Remove the equipment from service if you find cut or broken load-bearing strands, substantial localized thinning, melting, or other structural damage. Contact Technique Partner if you are uncertain about the rope’s condition or need a replacement.
Some surface discoloration from paint rubbing off a pull-up bar onto the rope is to be expected. Paint-transfer marks alone do not necessarily require rope replacement. Inspect the underlying rope fibers; do not assume that all discoloration is paint transfer. Stop using the equipment if discoloration is accompanied by melting, unusual stiffness, damaged fibers or suspected chemical contamination, and contact Technique Partner.
Use the rope only over a smooth, nonabrasive pull-up bar or other approved supporting structure. Use over knurled or textured handles, sharp edges, or rough surfaces is not approved and can cause premature wear and rope failure.
If a suitable smooth mounting surface is unavailable, contact Technique Partner to purchase the approved eyelet hook for overhead mounting. Install it according to the supplied instructions in a supporting structure suitable for the intended load.
Functional Trainer safety and permitted use
WARNING — STORED SPRING ENERGY AND REBOUND HAZARDS
The GripPartner Functional Trainer stores energy as its spring is loaded. If a hand slips or a grip is released, the grip can move rapidly and strike the user or another person, causing serious injury, including injury to the face or eyes.
Keep the device and its possible rebound path away from faces and other people. For approved exercises, hold the device low near waist level. Before loading the spring, check that neither grip could strike you or another person if control were lost. Holding the device low does not make it safe if its rebound path still reaches someone.
Maintain a secure grip with both hands. Use resistance you can control throughout the entire movement, and return the spring slowly under control. Do not intentionally release a loaded grip. Stop when fatigue, perspiration or another condition reduces grip security or control.
The internal safety tether limits travel; it does not eliminate rebound or prevent every impact. Never use the equipment with a missing, damaged or altered tether.
Before every use, inspect the grips, spring, tether or cable, fasteners and connections. Remove the equipment from service if you find cracking, fraying, looseness, corrosion, deformation or other damage.
Keep fingers clear of spring coils and connection points. Do not force the device beyond its approved movement limits. Do not adjust, repair or disassemble the equipment while the spring is loaded.
Children require direct adult supervision and a resistance level appropriate to their ability to maintain control.
Maintenance and storage
Recheck protective coverings and connections regularly. Replace worn protective sleeves or coverings before they allow foam to move or hard parts to become exposed. Contact Technique Partner for replacement components and repair instructions. Do not alter load-bearing components, springs or safety features without our written instructions.
Store equipment in a dry location away from sharp objects and excessive heat. Ask us before using a cleaner or disinfectant if its compatibility with the product materials is uncertain. Report product failures, injuries or safety concerns promptly and preserve the affected parts for assessment.
Limited warranty and customer support
Coverage and duration
Technique Partner LLC provides a 365-day limited warranty against defects in materials and workmanship, beginning on the original end customer’s purchase date. Coverage applies to products purchased directly from Technique Partner or an authorized dealer for use in the United States or Canada. Keep your dated proof of purchase. Any different product-specific warranty must be provided in writing at the time of sale.
Damage caused by improper use
The limited warranty covers defects in materials and workmanship. It does not cover damage caused by deliberate abuse, improper installation, use beyond the product’s specified limits, or continued use after damage or an unsafe condition is discovered.
Examples of excluded damage include:
ShadowPartner: Damage caused by attempting to detach the head; forcing elbows or other joints beyond their intended movement; forcibly folding the torso; overtwisting the XL hip assembly; deliberately bending or damaging the legs through improper landings; or using the equipment without its complete approved protective base or shoe assembly.
Hanging GripPartner products: Damage caused by improper mounting, prohibited swinging or inversion, jumping onto the grips, exceeding published limits, or dropping the grips onto hard surfaces.
Functional Trainer: Damage caused by intentional uncontrolled release, loading beyond published limits, or alteration of the spring, tether, grips or connections.
Claims will be evaluated according to the cause of the damage. A failure during an approved exercise is not automatically considered misuse. Wear, modification or improper use does not exclude coverage for an unrelated manufacturing defect.
These exclusions concern warranty coverage for product damage. They do not eliminate statutory consumer rights or determine responsibility for a personal injury.
What we will do
For a covered claim, Technique Partner will repair or replace the defective product or component at its option, without charge for the covered part or repair labor. We may supply a replacement component and instructions when that resolves the issue safely. Contact us before shipping the product or attempting a repair.
How to request service
-
Report the problem within the 365-day warranty period by emailing techniquepartner@gmail.com or calling 484-425-0776. Include your name, contact details, product model, purchase date, order number or receipt, a description of the issue, and clear photographs or video where available.
-
We will assess the information and explain the next steps. If a return is needed, we will provide the return address and instructions. Do not send equipment without those instructions. A claim reported within the warranty period will not be rejected solely because an authorized return arrives afterward.
-
Unless otherwise required by law or agreed in writing, you pay to package and ship an authorized warranty return to us. For an approved warranty claim, we pay standard shipping of the repaired product or replacement back to you within the United States or Canada. Any charges for work outside warranty coverage require your approval before the work begins.
Returns and delivery concerns
For an unused product you wish to return, contact us within 14 days after delivery for authorization and return instructions. Unless the return results from our error or a covered defect, the customer pays return shipping and the original shipping charge is not refundable, except where applicable law requires otherwise. Used products and custom orders require separate written return approval. These return conditions do not restrict valid warranty claims or statutory remedies.
Report missing items or delivery damage promptly and keep the packaging and photographs for assessment. For an order purchased through a dealer, contact the dealer about order changes or a refund; you may contact Technique Partner directly for technical support or a warranty claim. For purchases outside the United States or Canada, contact us about available support and any separately agreed warranty terms; mandatory local rights are unaffected.
Your legal rights
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty does not exclude implied warranties or limit any consumer rights or liability that cannot lawfully be excluded or limited.
Warranty and return information: https://www.techniquepartner.com/shipping-and-returns
For a free copy of the applicable warranty or help with this guide, call 484-425-0776.
Revision date 11/12/2026

